NT100-RE-DP Hilscher 用于高要求转换的网关

• 集成附属的 PROFIBUS 网络主干到 EtherCAT
• 最多连接 125 个 PROFIBUS 从站的主站
• I/O 数据转换时间最短，不到 10 毫秒
• 通过基于内存卡的加载在数秒内完成设备更换
• 可加载固件，用于灵活使用其他转换
• 带 USB 诊断和配置端口

netTAP 100 是一款用于复杂转换的协议转换器，支持 2 端口实时以太网到串行、现场总线到现场总线、实时以太网到现场总线以及实时以太网到以太网的转换。它支持任意组合的从站和主站功能。在情况下，主站功能不受限制。

存储器卡插槽允许用户将固件和配置数据保存在可移动板卡上。在故障情况下，只需将存储器板卡从旧 netTAP 100 移至备用单元，即可在几秒钟内恢复设备联机。

除了标准协议，netTAP 100 还支持用基于 Lua 的脚本语言 netSCRIPT 创建串行协议。供货中包含功能全面的开发环境。该环境允许用户舒适并快速地进行任何专有串行协议编程以及在转换过程中将 I/O 数据预处理转换为其他现场协议。

Integrate the attached PROFIBUS network backbone to EtherCAT
Master station connecting up to 125 PROFIBUS slave stations
The shortest I/O data conversion time is less than 10 milliseconds
Device replacement in seconds with memory card-based loading
Loadable firmware for flexible use of other conversions
USB diagnostic and configuration port

netTAP 100 is a protocol converter for complex convertibility, supporting 2-port real-time Ethernet to serial, fieldbus to fieldbus, real-time Ethernet to fieldbus, and real-time Ethernet to Ethernet. It supports any combination of slave and master functions. In the case of authorization, the functions of the master station are not restricted.

Memory card slots allow users to save firmware and configuration data on removable boards. In case of failure, simply move the memory board from the old netTAP 100 to the spare unit and the device can be brought back online in seconds.

In addition to the standard protocols, netTAP 100 also supports the creation of serial protocols using the Lua-based scripting language netSCRIPT. A full-featured development environment is included in the delivery. The environment allows users to comfortably and quickly program any proprietary serial protocol as well as convert I/O data pre-processing to other field protocols during conversion.